3 Pieces Cans Check
Top Load Check
It measures the resistance to top load of 3-piece cans.
The can is subjected to a progressive force until it buckles.
The value of the force at which the can buckles permanently is recorded and displayed.
Bead Depth Check
Instrument to measure the bead depth.
Equipped with a Mitutoyo digital calliper with a resolution of 0.001 mm. By turning a special hand wheel, the operator allows the calliper probe to scan the side surface of the can.
Available in the basic, fully manual version, it can also be fitted with an operator interface with a microprocessor which stores the depth values of each single bead.
The values can then be exported to a PC or SPC system. Lastly, in the fully automatic version, the hand wheel is replaced by a motorised system.
Flange Check
Used to measure the width of the can flange.
The reliable design allows the operators to take accurate measurements thanks to the special system which allows the positioning of the can to be repeated regardless of the format. The data can be exported a computer or SPC system via the relevant cable and USB adaptor.
Available in three versions for cans with a diameter of 50–90 mm, 50–200 mm and 50–300 mm.
Digital Height Check
Device for measuring the height of rigid containers.
Used to measure the height of food and beverage cans, glass and PET bottles and plastic containers. The base on which the container is placed which is perfectly flat since it is made of rectified steel is also used as a reference for homing the system.
The calliper can be connected to an external computer or SPC system via the relevant communications interface.
Inner Diameter Check
Used to measure the inner diameter of 2/3-piece cans.
Available in three versions for cans with different diameters ≤ 69 mm (211), ≤ 105 mm (404) and ≤ 153 mm (603).
Body Blank Check
Dimensional check of sheets.
Performed to measure the length, width and perpendicularity (angle) of the tin-plate bands.
The measurements can be exported to a PC or SPC system with the data output interface.
Available in three versions with the following measurement ranges (0 – 370 mm; 0 – 550 mm; 0 – 900 mm).
