Glass Containers Check
Burst Check Glass S/D
The automatic system with one or two stations designed to run pressure tests on glass containers.
The current system is very versatile and can be used to run pressure tests using all the methods specified in the standards required by the glass industry.
The bottle grip is adjustable and adaptable and does not require any tools for a format changeover.
The machine set-up is intuitive, the recipes for each format are easily managed by all operators and the data transmission system is compatible with all the data collection and management systems typically used in the glass industry (e.g. Vertec).
Vertical Load Tester
Vertical load simulator for glass bottles.
The instrument measures the vertical load of glass containers, simulating the force to which the bottles are subjected during capping and storing operations.
The device is controlled via PLC and displayed and checked via a touch screen.
I dati vengono registrati e possono essere trasmessi ad un database esterno.
Impact Tester
Instrument for testing impact.
It is the standard sector-based instrument for testing the resistance to impacts of glass containers.
The test measures the impact energy and angle of the pendulum rod. Packaging can also be tested with non-circular cross-sections by changing the accessories.
The structure and use of the instrument meet the requirements of “GB6552-86 – Methods for impact resistance of glass containers”.
Friction Angle Check
Used to determine surface lubrication.
It allows an accurate measurement of the lubrication power and the static friction coefficient on the surface of the container.
Three containers are placed on the inclined surface of the instrument in a pyramid shape. The electric motor gradually increases the inclination angle of the surface to which the two lower containers are secured and do not move during the test. When the inclination angle becomes great enough to overcome the forces of friction between the containers, the top container starts to slide and enters into contact with the trigger sensor which stops the drive motor and simultaneously, applies a brake to the inclined table.
This prevents arrest by inertia and inadvertent measurements of incorrectly high inclination angles.
Bottom Thickness Check
The instrument is used to measure the thickness of the bottom of glass bottles.
It has a digital indicator with a resolution up to 0.01 mm.
Wall Thickness Check
It has a digital indicator with a resolution up to 0.01 mm and is used to measure the thickness of the walls of glass bottles.
Verticality Check
It is used to measure the verticality deviation of glass bottles.
Fitted with a high-precision rotating locking plate, Mitutoyo digital indicator, automatic calculation display and platform with column, the instrument allows you to directly display and save the data.
Digital Torque Check
The Torque Tester (DTC) is a professional, standardised instrument for measuring the torque strength of caps and capsules used to close bottles, preforms, glass jars and plastic containers. It is used for fine-tuning and checking capping machines.
It is possible to measure both the opening and closing force of the container.
The measurement can be expressed in Kgf.cm/Inch.lbs/daN.cm/N.cm/N.m
