Dylog Hitech

Menu
Applications – Laboratory Metrology –
Laboratory Metrology

Coating Checks

Menu

Enamel Rater Single

Electrochemical analyser to measure the thickness and discontinuities of the inner coating of metal containers. The instrument is used to measure the porosity, thickness and adherence of the internal coating of metal containers for food and beverage products. It is also possible to detect accidental defects, such as the loss of coating around the seam, weld or drawing out point, as well as the presence of scratches or abrasions. The instrument measures the electric current that passes through the sample; the quantity of current detected is proportional to the thickness of the coating (compactness) and/or the defects (discontinuity) of the internal coating. The test is carried out on 2 or 3-piece cans, aerosol cans and lids.
ename rater single

Coat Thickness Check

Instrument to measure the thickness of the coating inside metal containers.
The surfaces of the metal containers for food and beverages are normally coated both internally and externally. This instrument allows you to rapidly measure the thickness of the inner and outer coating of beverage cans, tin-plate cans and sheets. The measurement is indicated in g/m2.
The instrument can be connected to two different probes to take measurements on the can body or the metal sheet before cutting.

Mobility Check

Instrument to check mobility (sliding).
The can lubrication tester is used to measure the sliding friction coefficient on the body and base of the can.
It can also measure the sliding friction coefficient of empty spaces.
A special feature is the possibility to select a dedicated data transmission mode by sending the measured values to an external PC (1 sample value for each millimetre).

mobility check